To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Attach accessories to the front of your vehicle with this low-profile hitch receiver. Perfect for winches, spare tire carriers and more. Hidden cross tube leaves only receiver visible. Aluminum and steel alloy construction is sturdy and eco-friendly.
Features:
Specs:
The EcoHitch Hidden front-mount trailer hitch is designed to be as inconspicuous as possible. The hitch's cross tube bolts onto your vehicle's frame. No welding is required. Once the hitch is installed, only the receiver will be visible. This means that your vehicle can maintain its stylish, from-the-factory look, and does not require any major modifications to the body or frame.
With a combination of aerospace-grade aluminum, steel, and stainless steel, each EcoHitch is made of a strong metal alloy that will withstand the test of time. The lightweight alloy is composed of recycled materials. Traditional steel hitch manufacturing often uses coal or oil, which contributes to harmful gas emissions. The EcoHitch's recycled materials limit the carbon footprint during manufacturing, so you get a sturdy trailer hitch that is environmentally friendly.
This EcoHitch trailer hitch is tested for durability and sturdiness. Using Finite Elemental Analysis (FEA), individual points of stress on the hitch can be detected and remedied. Designers can accurately test the hitch to ensure that it will meet or exceed SAE J684 standards. The EcoHitch Hidden trailer hitch is carefully researched and strength tested for a durable, high-quality hitch that can resist damage while on the road.
At etrailer.com we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.
Customer Satisfaction Score:
100% were satisfied with this product
0% of customers were not satisfied
Ratings & Reviews
I love my new receiver
Especially happy with quick delivery.
Exactly what I wanted. Got it installed today hooked the winch to it and tried it out. This hitch is going to work great for what I need it to do.
Hitch worked great on my f350 srw diesel. Had to install so I could put kayaks out front of the cab and still tow our fifthwheel.
Works as advertised
Easy install. Yes it will work on the diesel model as long as you don’t have a aftermarket inner cooler.
Easy install and completely hidden 2024 F-250 Super Duty 7.3L gas motor, I'm very excited to have purchased this product.
Great service and knowledge of product.
2024 F250 7.3 Godzilla- easy install, fit and finish is perfect, a must for those wanting a hidden front hitch
This front Eco hitch is by far the best looking one and install was a breeze with only taking our team two hours start to finish.
Works well, you don’t have to remove the front bumper as the directions indicate
High quality hitch. The unit is slightly too short and did not fit snuggly between the frame rails which required me to alternate torquing down the bolts, adding washers as more threads became available, etc. Otherwise, great product.
The receiver hitch through the bumper looks great. It is almost unnoticeable, and could easily pass as a manufacturer stock part. I did have to trim the tow hook mounts slightly to provide clearance, but that was not a difficult task.
Pictures could be better in the instructions, never could understand what the purpose of the carriage bolts that came with it were, analyzed where they go on the bumper and they really had no purpose at all so I skipped them and left the stock in place. The product itself is phenomenal! So happy I discovered it while looking for another front end receiver. I’ve had previous front end receivers on previous trucks, they did the job but having it up higher on the grill is genius, I almost spent thousands on a ranch hand replacement bumper so I could have the receiver up higher but stumbled across this product! The fact it’s inset and hidden is really clean and the icing on the cake! Did it by myself with a jack and stool and used the tape technique to hold the front bumper mounts in place. Saw the tape trick on YouTube.
Overall looks great! Installer had to modify the plate holder to make it fit better to avoid interference with bumper. Bike racks fit well
Product build quality was very good. Issue I had was EcoHitch was approximately 5/16” narrower than frame rails of truck frame. Requiring me to come up with spacer and 2ea longer proper grade bolts. These were used on passenger side as it also helped with centering hitch tube to center between frame rails of truck. I did install without removing bumper, but you need proper tools and finesse ;) I also reused center plastic air diverter by cutting and sectioning it. Using original upper fasteners and drilling new holes on lower part that lined up with plastic fasteners going through bumper. End result looks better than factory.
Was so easy to install. Pictures made details very easy. Shipping this beast was quicker than I really imagined it would be. That's great customer service there.
Mike L.
3/20/2026
Thanks for the pics James, congratulations on a picture-perfect install. Good job, Sir!
Fit Perfect, only thing I would change is giving longer bolts for the side mounting. The 4 bolts are a little short but i had some longer ones and everything else worked great and came out perfect also comes with a plate bracket that slides into hitch which is Amazing
Kate F.
3/25/2026
Install looks great Adam! I really like how this one comes with the license plate holder. What do you plan on using the front hitch for?
I love the fact that the hitch is completely hidden and doesn’t affect approach angle. I did buy a solid shank lowering receiver so I can see over the motorcycle when it’s mounted up there. It did take me 4 hours to install but I only had a bit of help taking the bumper off and putting it back on. The rest I did alone. License plate bracket arrived bent but I bent it back and think it will be ok.
Gwendolyn Y.
4/9/2026
Install looks great, Jeff! What are you going to be using the hitch for?
this is second one i have put on a superduty. Instructions need a bit of tweaking with better pics and or verbiage. HOWEVER, you can put this on without removing bumper, it does take the patience of a budda , but the 2 semi hidden 8 mm bolts on the air plenum can be removed with a 1/4 ratchet.
i used a small bottle jack stuck inside the hitch and lifted it up then cribbed it, then placed jack on cribbing and lifted again slowly and then slide the hitch into place
the 8 mm valance bolt dead center of the bumper needs to be removed temporarily, as well as clipping a plastic alignment pin
i use normal MECHANIC tools, from ,y 40 plus years of wrenching
take your time and its an 2 day job if your one person
i also used some under body felt panels to make a plenum for the air that gets directed up to the radiator with the plastic plenum, plus it makes it dark and protects the engine lower pulley from road spray
Victoria H.
3/12/2025
Thanks for including photos with your valuable insight Robert! I know this information will be helpful to someone shopping this in the future!
Robert
3/12/2026
SUPERB no issues
Kate F.
3/12/2026
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time.
Gwendolyn Y.
5/9/2025
I love that you already got everything installed and up and runnin on your 2024 F-250, Joel! Are you just going to have a winch attached to the hitch or will you be putting anything else on there?